Understanding the Redflow battery
Inherently safe characteristics
These characteristics, along with its water-based electrolyte, makes the ZBM2 flow battery inherently safe, reducing to a minimum the risk of fire and “thermal runaway” in small, medium or large energy storage systems. Additionally, the electrolyte flow distributes heat across the battery, contributing to easier thermal management of the battery and more effective cooling capabilities. Module Management System (MMS). The ZBM2 battery is equipped with the Redflow Battery Management System (BMS) and data communication, which offer multiple advantages.
Real time data, diagnostics and event history
Firstly, the ZBM2 can be accessed securely at any time to
provide information about the battery status, real time data, diagnostic and
event history. This access improves control of the system, both local or
remote, and its performance. These “smart battery” capabilities also improve
its reliability and fault tolerance.
MMS and
BMS active battery protection
The ZBM2 MMS provides active protection for the battery and the system against misuse, damage or extreme operating conditions, such as fluctuations in voltage or temperature. This improves
100 per cent depth of discharge
The zinc-bromine flow battery’s 100
The zinc-bromine flow battery’s 100
Zero state of charge advantages
In solar applications, the battery can be started from a zero per cent state of charge every morning and used to store the excess energy supplied by the sun during the day. The entire battery capacity is available to store solar-generated energy. At any time during the day or the night, the battery can be discharged partially or fully down to zero per cent state of charge and left safely in this condition overnight. If no solar energy is supplied to the battery the next day, the flow battery incurs no “ageing” or performance degradation.
This capability contrasts with other common battery chemistries that must start the day at a higher state of charge (for example 50 per cent) to avoid deep discharge states that could age the battery faster. This limits their useable daily energy storage capacity. When stored energy is needed, these batteries can be discharged only back to 50 per cent – no further discharge is allowed. If no solar energy is available the next day, the battery life and capacity is negatively affected by deep discharge conditions leading to sulfation.
The capability for safe and complete discharge of the ZBM2 battery also proves advantageous in diesel backup generator minimisation applications.
Increased capacity
The ZBM2 flow battery’s ability to use 100 per cent of its stored energy also enables better sizing of the energy storage system compared to other battery technologies. It is essential to factor this difference in useable capacity for a ZBM2 into comparisons of battery system capacity. A conventional battery must reserve a large proportion of its theoretical energy storage capacity to protect the battery from the damage or reduced useable life that result from 100 per cent depth-of-discharge conditions. A conventional battery can also take a long time to charge fully, with charge-rates slowing as the battery approaches its completely full state. This means that even more theoretical battery capacity is often reserved from the application in practice, to accommodate this characteristic. By contrast, a ZBM2 can routinely operate from zero per cent to 100 per cent state-of-charge and back to empty for every operational cycle without loss of performance or risk of battery damage.
Linear voltage
Another advantage is that ZBM2 charge and discharge cycles operate at a near linear voltage and current levels across the entire range of charge states. This allows a ZBM2 to be charged on a near-linear basis. It also allows the entire ZBM2 capacity to be usefully delivered to the required system load, with output current and voltage also remaining consistent and stable across the entire discharge phase. ZBM2 flow batteries are preferable in the case of remote applications where site access is difficult – for example, seasonal impediments or transport difficulties, etc. – because they can tolerate long power outages.
Complete cell tested performance and reliability.
The ZBM2 physical and mechanical characteristics also deliver benefits. For example, each standard ZBM2 battery contains 30 cells in series directly interconnected to reach 48V nominal voltage. Redflow tests every ZBM2 for the battery’s lifetime performance and reliability. Other technologies test only the individual cells – for example the 2V cell in the lead-acid chemistry – but provide no information on the performance of the interconnected 24 cells that are needed to reach the full 48V. Sealed assembly.
The ZBM battery has a sealed assembly and uses corrosion-resistant materials. These features make the battery ideally suited for extreme condition environments. A summary of Redflow battery advantages and challenges is reported in the following Table 1.
ZBM2 Self Maintenance Cycles
To optimise its performance, the ZBM2 must be completely discharged periodically as a self- maintenance requirement to maximise the surface area of the battery electrode surfaces. The ZBM2 MMS automatically engages this ‘electrode scrubbing’ operation on a periodic basis if the battery has not been recently discharged to a zero state of charge during normal operations. The ZBM2 system design needs to accommodate this typical flow battery characteristic. For single battery systems, the design must therefore accommodate short periods where the ZBM2 is effectively ‘off’ at the end of a scrubbing cycle. For designs containing multiple ZBM2s, batteries can be scheduled to undergo this cycling process sequentially by accessing a menu in the BMS. The user can specify how to execute this automated self-maintenance sequencing – whether all batteries together or one at a time.
The ZBM2 Design
The large size of typical flow battery designs means that most installations worldwide fall in the category of large-scale systems where the battery is custom-made for the specific energy storage application. Redflow has commercialised a modular, small-scale battery that enables the deployment of its ZBM2 flow battery for applications previously considered too small for flow batteries, including residential, commercial & industrial (C&I) and telecommunications.
An example of this scalability is the Redflow LSB (Large Scale Battery) reference platform, a shipping-container form factor containing as many as 60 ZBM2 batteries – or 45 batteries and multiple battery inverters – that delivers large-scale energy storage capacity suitable for renewables integration, distributed generation and uninterruptible power supply (UPS) systems applications. In addition, the LSB itself is modular, allowing the deployment of multiple LSB units for grid-scale energy storage and load-levelling applications.
Redflow made key design choices to ensure one battery could match each of those potential deployment scenarios. The following section discusses some of these crucial design choices.
Mechanical design
The ZBM2’s physical assembly includes a removable electrode stack placed at the top of the battery. This allows for stack replacement at the end of life and recycling/refurbishment of the battery. Two tanks – using a one-inside-the-other design – provide interstitial space to simplify the battery assembly and contain potential electrolyte spillage.
The sealed MMS box is at the front to avoid direct exposure of battery terminals and to allow cabling access.
DC pumps
Redflow has co-developed a role-specific advanced DC pump for the ZBM2, which offers several advantages. Firstly, the battery itself can power the pumps without requiring AC components. Redflow’s DC pumps feature brushless motors that offer superior performance in terms of life, noise, torque, reliability and robustness. An important feature is also the capability to dynamically adjust the pump speed, and hence the flow speed, according to the required charge or discharge rate. This delivers an improvement in overall battery efficiency and extends the life of the pumps. The Redflow MMS monitors the pump flowrate, letting you detect and report pump failure.
Cooling apparatus
The ZBM2 contains an internal cooling apparatus that is designed to extend the operating temperature range of the battery, allowing operations in the electrolyte temperature as warm as 50°C without any negative effect on the battery life.
Advanced MMS
As a plug-and-play energy storage device, Redflow’s ZBM2 is a “smart battery” that can work independently from the surrounding system. Redflow achieves this by using an advanced MMS that can perform independent operations and act when needed. The Redflow BMS can also start some operations with external commands, allowing the system integrator to adjust or drive the system responses through settings in the BMS interface.
Operational features
The ZBM2 design is optimised for telecommunication applications with these features:
- Voltage range adjusted for standard lead-acid systems with a maximum charging voltage to 57V and a low voltage disconnects down to 40V,
- Extended high-end temperature range,
- No
ageing due to deep discharge and long discharged periods, - Low maintenance.
Redflow has included additional features for integration with renewables and interfacing with advanced monitoring. For example, Redflow has introduced electronic protection for overcharge (not affecting the instantaneous discharge) for direct connection to solar panels and renewables. Also, several ZBMs can be connected in parallel without adverse inter-battery current flows due to differences in the charge/discharge state. No protection devices are required in this configuration, and no unwanted flow of power can be observed among multiple ZBM2 modules connected to the same DC bus.
ZBM2 can be used with commercially available inverters for residential or industrial applications to provide backup or renewables shifting. It is easy to integrate ZBM2 monitoring in more complex supervisory systems. For large energy storage applications using the LSB reference platform, ZBM2 modules are connected in series to reach higher voltages. The de-facto standard is the 400-800V range. Redflow has designed a variation of the MMS module for this application to allow for series connection without affecting the ZBM2 protection and access to battery information.
Standby Power Supply mode – ZBM2 as a pre-charged ‘electro-chemical’ generator
One of the most advantageous operational modes of the ZBM2 is Standby Power System (SPS), a storage mode in which the battery can act as a pre-charged electro-chemical generator. Requiring just 10 per cent of the battery’s stored energy to establish, this mode enables you to leave the ZBM2 unattended for months, with no additional self-discharge occurring. This eliminates the need for trickle charge, equalisation or conditioning. During this period, the voltage on the battery terminal can decay to zero volts while the battery will retain as much as 90 per cent of its original state of charge. When required, the battery can restart within 60 seconds – either by an external voltage of at least 36V or by restarting itself. SPS mode enables the battery to self-sustain and supply stored energy – as much as 9kWh from one ZBM2. If extra ZBM2s are connected in parallel, the first battery, once restarted, can power up the others, with the BMS restarting them in seconds.
The ZBM2 in SPS mode can be used in conjunction with other batteries for UPS applications. Today, expensive lead-acid battery banks incur significant costs from ageing, power consumption, weight and maintenance. ZBM2 also considerably reduces operational costs.
Another application of the ZBM2’s SPS mode is in areas that experience frequent blackouts. Without requiring any maintenance charge, the ZBM2 can start in the event of an electricity outage to power emergency loads. For example, with just one complete discharge each week, the battery will only perform approximately 500 cycles during 10 years, providing plenty of capacity to supply Standby Power when required. The ZBM2 battery is warranted for 10 years or 36,500 cycles – whichever comes first.
Learn more about Redflow and Zinc-Bromine Flow Batteries
Redflow Limited, a publicly-listed Australian company (ASX: RFX), produces small 10kWh zinc- bromine flow batteries that tolerate daily hard work in harsh conditions. Marketed as ZCell and ZBM2, Redflow batteries are designed for high cycle-rate, long time-base stationary energy storage applications in the residential, commercial & industrial and telecommunications sectors, and are scalable from a single battery installation through to grid-scale deployments.
Redflow batteries are sold, installed and maintained by an international network of energy system integrators. Redflow’s smart, self-protecting batteries offer unique advantages including secure remote management, 100
For countries in Africa please contact Specialized Solar Systems
t: +27(0)44 878 1126
e: info@specializedsolarsystems.co.za